atif@zebrahomecinema.com

Barnes, London

Basement Media Room

System
5.2.4 Dolby Atmos
Picture
BenQ laser, 138-inch
Investment
£16,800

This basement media room in Barnes, south-west London, sits in a 4,000 sq ft house refurbished by a property developer. The basement covers about 1,000 sq ft and holds a cinema space, a games area with a pool table and a steam room. The cinema uses a BenQ 4K laser projector on a 138-inch screen with M&K Sound speakers in a 5.2.4 Dolby Atmos layout, all run by Control4. The AV cost £16,800.

Virtus Integration designed and installed the system.

The brief: a cinema that helps sell a house

This was not a family commissioning a room for themselves. A developer was finishing a prime London home for sale, and the cinema was part of how the house would be presented. The room had to add to the lifestyle and value of the property without working against its architecture.

When a cinema is part of a house for sale, a few things generally matter more than usual. The system should be simple enough for a buyer to use straight away. The speakers should stay out of sight, so the room reads as part of the house. Here the basement is also shared with a games area, so the cinema is one zone of a larger space rather than a sealed room.

How the speakers are laid out

All the speakers are from M&K Sound, in a 5.2.4 Dolby Atmos layout: five ear-level channels, two subwoofers and four height speakers.

PositionSpeakers
Front left, centre and right3 × M&K IW85 in-wall
Surrounds2 × M&K IC95 in-ceiling
Dolby Atmos height4 in-ceiling
Subwoofers2 × M&K IW28S in-wall, each with a VA500 amplifier

A Denon AV receiver drives the system. Two subwoofers rather than one is a general rule we follow: a pair placed well gives smoother bass across more seats. Control4, with a Halo remote, runs the whole room from one handset.

Picture: laser projection in a room with blinds

The projector is a BenQ Pro UHD 4K laser model, filling a 138-inch screen. The room has blinds that can be opened to let some daylight in.

In general, any daylight on a projection screen lifts the blacks and washes out the picture, so for films the blinds go down. If you are planning a basement with windows or light wells, budget for blackout blinds from the start.

What it cost

The AV system came to £16,800, at UK prices for this project. That figure covers the cinema equipment, not the wider refurbishment of the house. For how budgets break down for different sizes of room, see our UK home cinema cost guide, and for shared spaces like this one, our media room design guide.

Frequently Asked Questions

How much did the Barnes basement cinema cost?

The AV system cost £16,800 at UK prices for this project. That covers a BenQ 4K laser projector, a 138-inch screen, a Denon receiver, a 5.2.4 M&K Sound speaker system built into the walls and ceiling, and Control4 with a Halo remote. The refurbishment of the house and basement was separate.

What does 5.2.4 mean?

Five ear-level channels (left, centre and right at the front, plus two surrounds), two subwoofers, and four height speakers in the ceiling for Dolby Atmos. Four heights, usually set as one pair in front of the seats and one behind, let sound move overhead from front to back. Here every speaker is built into a wall or the ceiling.

Is a home cinema worth adding to a house you plan to sell?

For a prime property, a finished cinema can be part of how the house is presented, which is how the developer used this one. Keep it simple to operate, hide the speakers, and spend on the parts a buyer notices in a short viewing: picture size, clean finishes and bass.

Can a projector work in a basement with natural light?

Yes, if the light can be controlled. This basement has blinds that open to let light in and close for viewing. Daylight on the screen greys out dark scenes on any projector, so blackout blinds are worth planning in from the start.

Inspired?

Let's Create Your Space

Every extraordinary space starts with a conversation.

Get in Touch