atif@zebrahomecinema.com

Little Aston, Sutton Coldfield

Media Room Snug

Sound
M&K with Dolby Atmos
Display
Sony 83-inch OLED
Investment
About £20,700

This media snug in Little Aston, Sutton Coldfield began as a family lounge and became a media room during a major renovation of the house. Closing the space off made it a separate family entertainment room. It has a Sony 83-inch OLED set into a Camira fabric wall, M&K Sound speakers with Dolby Atmos in the ceiling, and KNX control of lights and curtains. It came to about £20,700.

Virtus Integration designed and installed the system.

The brief: a room nobody had planned

The family were in the middle of renovating, with rubble still on the floor, when our founder first walked round the house. The homeowner had not planned a cinema or media room. The idea came from that visit: close the room off so it could become a space of its own.

The aims that came out of the conversation were simple:

  • ▪a space the whole family could use together, and that the children could use on their own as they got older;
  • ▪lighting treated as a key part of the design, not an afterthought.

A fabric wall that hides the speakers

The front of the room is one bespoke wall. The OLED is recessed into it, and the front speakers and subwoofers sit behind acoustically transparent Camira fabric. The fabric is backlit with dimmable LED, which gives a soft glow around the screen.

PositionSpeakers
Front left, centre and right3 × M&K IW950 in-wall, behind the fabric
Subwoofers2 × M&K IW28S in-wall, each with a VA500 amplifier
SurroundsM&K M40T tripole
Dolby Atmos height4 × M&K IC95 in-ceiling

An Anthem MRX 740 receiver runs the speakers. The electronics live in a Clic AV cabinet, so the room shows a screen, fabric and seating, not a stack of boxes.

In general, an OLED suits a room like this because each pixel makes its own light. Blacks stay deep when the lights are low, and the picture still holds up when the room isn't fully dark.

Lighting and curtains on KNX

The homeowner runs an electrical installation company that works with KNX, a smart-wiring standard for home automation, and he put it into the house himself. In this room it drives three lighting circuits: the main lights, a light over the door, and the backlight behind the fabric at the sides of the TV, which was our suggestion. Each can be set from switches by the seats or from an app on his phone.

Motorised curtains close in front of the screen. That was the homeowner's own request, a nod to the cinemas he went to as a child, where the curtains opened before the film started.

How the room gets used

The family now hold a movie night every Friday. The son plays Xbox games in here with the surround speakers putting the action behind him, the daughter watches Netflix, and the room hosts football and boxing nights with friends. The video tour and homeowner interview covers this in his own words.

What it cost

ItemCost
AV system£15,900
Fabric wall and cabinet£4,805
Totalabout £20,700

These are UK prices for this project. For how a media room differs from a dedicated cinema, see our media room design guide, and for wider budgets our UK home cinema cost guide.

Frequently Asked Questions

How much did this media snug cost?

About £20,700 in total, at UK prices for this project. The AV system was £15,900 and the Camira fabric wall and equipment cabinet were £4,805. The room was created during a wider renovation of the house, from the family lounge, with an 83-inch Sony OLED and M&K Sound speakers.

Can a family lounge become a media room?

Yes. This one was a family lounge, closed off and turned into a media room while the house was being renovated. Doing it during building work means walls, cable runs and ceiling speakers can go in before anything is finished, and the room still works as a comfortable family space afterwards.

Why put the speakers behind a fabric wall?

It keeps the front of the room clean. Acoustically transparent fabric lets sound pass through, so in-wall front speakers and subwoofers can sit behind it without being seen. Here the same wall holds the recessed OLED and an LED backlight, so the screen, sound and lighting share one surface.

Do you need a dedicated automation system for a media room?

Not always, but it helps. This room uses KNX to run three lighting circuits and the motorised screen curtains, from wall switches by the seats or a phone app. The homeowner already worked with KNX, which made it a natural choice. Control4, used in several other projects in our portfolio, is a common alternative.

Inspired?

Let's Create Your Space

Every extraordinary space starts with a conversation.

Get in Touch