This basement in Little Aston, Sutton Coldfield already had a cinema. It was showing 1080p pictures on 5.1 sound. The refit took it to native 4K projection and a 7.2.4 Dolby Atmos speaker layout, and put lighting, picture and sound under one Control4 system. The interior was redone at the same time, in cobalt blue padded panels with copper dividers. The total came to about £53,000, and £25,000 of that was the interior.
Virtus Integration installed the AV, and X-Interiors designed the interior.
The brief: upgrade a cinema that already worked
The owners didn't need a new room; they needed a better one. The old system was a 1080p projector with 5.1 sound. The new one had to do three things:
- ▪show native 4K on a 120-inch screen, with deep blacks in a room that can be made fully dark;
- ▪add height speakers for Dolby Atmos without changing the shape of the room;
- ▪run from one button, so nobody needs a manual to watch a film.
The room kept its two-tier seating, with an LED-lit step up to the back row, and its air conditioning unit at the back. The money split almost evenly between the AV system and the interior.
How the 7.2.4 speakers are laid out
Every speaker is hidden in a wall or the ceiling. All of them come from M&K Sound, so the sound stays the same character as it moves around the room.
| Position | Speakers | Where they sit |
|---|---|---|
| Front left, centre and right | 3 × M&K IW150 | Behind the 120" acoustically transparent screen and its motorised curtain |
| Surrounds | 2 × M&K IW85 | In the side walls, either side of the main seats |
| Rear surrounds | 2 × M&K IW85 | In the back wall |
| Dolby Atmos height | 4 × M&K IW85 | In the ceiling, one pair in front of the seats and one behind |
| Subwoofers | 2 × M&K X10 | Dual 10-inch drivers in a push-pull layout |
The surround and ceiling speakers have magnetic grilles that can be painted. Here they were painted the same dark blue as the walls, so they disappear unless you look for them.
Picture: JVC projector with a Lumagen processor
The projector is a JVC D-ILA N5, a native 4K model chosen for its black levels and contrast. A Lumagen Radiance Pro 4242 sits between the sources and the projector. It handles scaling, frame rates and aspect ratio for every source: Sky Q, Apple TV and a PlayStation 5.
Light control does a lot of the work. With the room fully dark, the black bars on 2.35:1 films all but vanish, and the picture fills the wall with no visible frame. In a room with stray light, those bars show as grey strips above and below the picture.
Sound and control
An Anthem AVM-60 processor handles the sound, and a separate Yamaha MX-A5200 amplifier powers the speakers. Splitting the two was chosen for performance. The Anthem's ARC room correction measures the room and corrects the speakers' response at the seats.
Control4 runs everything else: the projector, the curtain, the lighting scenes, the air conditioning and the LED strip along the second-row platform. A wall touchscreen and a Neeo remote both work the system. "Cinema" mode dims the room to black, opens the curtain and starts the projector. "Lights on" turns it all back up for cleaning.
The lesson: build out the rattles before you treat the room
The padded fabric panels look like acoustic treatment, but here they are decoration. In a basement cinema, the bigger risk is anything loose: the screen wall, side panels, the coffer, trim. Bass from two subwoofers will find every loose fixing and make it buzz. So the advice from this project is to screw and fix down every panel, frame and piece of trim, so that the only thing moving during an explosion is the audience.
Our view is that solid construction comes first and treatment second. A rattle can't be fixed with absorption, and good room correction works best in a room that isn't fighting it.
What it cost
| Item | Cost |
|---|---|
| AV equipment and cabling | £25,000 |
| Installation | £3,000 |
| Refurbishment and interior | £25,000 |
| Total | about £53,000 |
These are UK prices for this project. For how budgets break down for a new room rather than a refit, see our UK home cinema cost guide. The video tour, with the system running, is in our basement cinema walkthrough.
Frequently Asked Questions
How much did this basement cinema refit cost?
About £53,000 in total. That was £25,000 for AV equipment and cabling, £3,000 for installation and £25,000 for the refurbishment and interior. Because the room was already a cinema, this was a refit of the system and the decor rather than a new build.
What does 7.2.4 mean in this room?
Seven ear-level speakers (three behind the screen, two at the sides and two at the back), two subwoofers, and four height speakers in the ceiling for Dolby Atmos. Every speaker here is an M&K Sound in-wall or in-ceiling model.
Do the padded wall panels treat the sound?
No. In this room they are decorative. The acoustic priority in a basement cinema is solid construction: every panel, frame and piece of trim fixed so that nothing rattles when the subwoofers play. Room correction in the Anthem processor then tunes the speakers to the seats.
Can an existing basement cinema be upgraded to Dolby Atmos?
Yes. This room went from 5.1 to 7.2.4 with in-wall and in-ceiling speakers, a new processor and amplifier, and new lighting and control, while it stayed a two-tier cinema. The ceiling needs space for in-ceiling speakers, and each one needs its own cable run back to the rack.


