This cinema snug in Loughborough is a former lounge, converted into a dedicated cinema during a full refurbishment of the house. The room links to the kitchen and the garage. It has an Epson EH-TW9400 Pro-UHD projector on an acoustically transparent CinemaScope screen, a 5.2.2 Dolby Atmos layout of M&K Sound speakers, motorised recliners and Control4 on a single remote. The total was about £38,000.
Abell Building Services built the room, and Virtus Integration designed and installed the AV.
The brief: from lounge to dedicated cinema
The room was a lounge. It was turned into a dedicated cinema while the whole house was being refurbished, which made two things simpler. Cables could run before walls were closed up, and the equipment could live somewhere else. Here the electronics rack sits in the garage next door, so the snug has no visible box of kit and no fan noise from it.
The room is intimate, with custom fabric walls and dimmable LED lighting, so it feels apart from the rest of the house.
Screen and picture
The screen is a perforated, acoustically transparent CinemaScope screen, about 3 metres wide in the 2.4:1 widescreen shape used by most feature films. A black frame runs around it, the way a commercial cinema frames its screen. The projector is an Epson EH-TW9400 Pro-UHD model, which takes 4K sources. Like any projector, it looks its best in a room where the light can be fully controlled.
The speakers: 5.2.2 Dolby Atmos
| Position | Speakers |
|---|---|
| Front left, centre and right | 3 × M&K IW950 in-wall, behind the screen |
| Surrounds | M&K M40T Tripole |
| Dolby Atmos height | 2 × M&K IC95 in-ceiling |
| Subwoofers | 2 × M&K V10 |
| AV receiver | Denon X4800H |
The perforated screen lets the front three speakers sit behind the picture, so voices come from the people on screen. Tripole surrounds spread their sound wide. In general that suits a small room, where seats are often close to the side walls. The two ceiling speakers add the Dolby Atmos height layer.
Seating and control
There are five tiered, motorised FrontRow recliners with USB charging and cup holders. Control4 runs the room from a single Neeo remote: lights, screen and sound. One remote that does everything is what makes a dedicated room easy for the whole family to use. For more on planning a room like this, see our dedicated cinema room design guide.
What it cost
| Item | Cost |
|---|---|
| AV, fabric walls, lighting and seating | £32,000 |
| Building work and installation | £6,000 |
| Total | about £38,000 |
These are UK prices for this project. For how budgets compare across room sizes, see our UK home cinema cost guide.
Frequently Asked Questions
How much did this home cinema snug cost?
About £38,000 in total. That was £32,000 for the AV equipment, fabric walls, lighting and seating, and £6,000 for building work and installation. These are UK prices for this project, where a lounge was converted into a cinema during a full home refurbishment.
Why put the equipment rack in the garage?
It keeps the cinema quiet and uncluttered. Amplifiers and receivers make heat and often fan noise, and a rack takes up space a small room can't spare. Here the snug sits next to the garage, so the rack went there, with cables run through during the refurbishment.
What is 5.2.2 Dolby Atmos?
Five ear-level speakers, two subwoofers and two height speakers. In this snug that means three M&K in-wall speakers behind the screen, M&K M40T Tripole surrounds, two M&K V10 subwoofers and two M&K in-ceiling speakers for the overhead sound in Dolby Atmos films.
Is a CinemaScope screen right for a small room?
It can be, if the room is mostly for films. A 2.4:1 screen fills its full width with most feature films, so the room gets the widest picture its front wall can hold. This snug uses a 3-metre CinemaScope screen with the front speakers hidden behind it.


