atif@zebrahomecinema.com

Barnt Green, Worcestershire

Lounge Bar Media Room

Sound
Triad in-ceiling 7.2
Picture
Sony 4K on a lift
Investment
About £25,500

This is a media room built into an existing family lounge and bar in Barnt Green, Worcestershire. The room had to keep working as a lounge, while also handling films, sport, gaming and music. A Sony VPL-VW590 native 4K projector on a motorised lift, a drop-down screen and Triad in-ceiling speakers do that without changing the decor. It cost about £25,500 including installation, and it was the second system for the same family.

Virtus Integration installed the AV.

The brief: a cinema that leaves the lounge alone

The family wanted one room for several things. The client enjoys gaming, films and music, but the space is still the family lounge, with a bar at one end and the seating and television at the other. The house had already been decorated, so one of the main requirements was to cause as little disruption to the finished room as possible.

That ruled out the usual layout. Speakers could not really go in the front wall, and the family did not want subwoofers standing in the corners or anywhere on the floor.

Speakers: everything in the ceiling

With the front wall off the table, the whole speaker system went into the ceiling.

PositionSpeakersWhere they sit
Front left, centre and right3 × Triad directional in-ceilingFront of the ceiling, angled towards the seats
Surrounds2 × Triad in-ceilingLeft and right of the seating
Rear surrounds2 × Triad in-ceilingA pair behind the seating
Subwoofers2 × Triad in-ceilingIn the ceiling corners

The front three are directional models. A standard ceiling speaker fires straight down, which pulls the sound up and away from the picture. An angled speaker aims at the listening position, which in general helps dialogue and the left-right image hold together with the screen. The two ceiling subwoofers give the bass that films and games need without any boxes on the floor.

Picture: a projector lift with a limit

The projector sits on a Future Automation PD 3.5-740 lift, and the 16:9 Screen Research screen drops down from the ceiling when it is needed. The depth of the ceiling void was the limiting factor: the lift could not raise the projector any higher, so it stays partly visible. The family did not mind, and it has become a talking point for guests.

The lesson is general. If you want a projector to disappear completely, check the ceiling void depth against the lift and projector before anything else is fixed.

Equipment and control

The Denon AVC-X3700 receiver and the Blu-ray player sit in a CLIC Model 212AV cabinet in the corner, so there is no rack in view. Control4 (an EA1 controller) runs the system from a Neeo remote. One button plays music or switches to the television; another lowers the screen and brings the projector down for a film. The window has a motorised blind, and the automation covers shading as well as viewing and lighting, so the room can be darkened for the projector without anyone getting up.

For more on fitting a cinema into a room that also has to be lived in, see our guide to media room design.

What it cost

ItemCost
AV equipment and cabling£22,315
Installation£3,185
Totalabout £25,500

These are UK prices for this project. Because the room was already decorated and nothing structural changed, there was no building or interior line in the budget. For how costs compare with dedicated rooms, see our UK home cinema cost guide. The video tour, with the screen and projector coming down, is in our entertainment lounge walkthrough.

Frequently Asked Questions

How much did this lounge media room cost?

About £25,500 in total: £22,315 for AV equipment and cabling and £3,185 for installation. These are UK prices for this project. It covered a Sony native 4K projector on a motorised lift, a drop-down screen, seven Triad in-ceiling speakers and two subwoofers, a Denon receiver, a motorised blind and Control4.

Can you put a cinema in a lounge without front wall speakers?

Yes. In this room the left, centre and right speakers are directional in-ceiling models angled at the seats, with surrounds and two subwoofers also in the ceiling. It is a sensible answer when the front wall is already finished or has no space for in-wall speakers.

Why is the projector still partly visible?

The ceiling void was not deep enough for the lift to take the projector fully out of sight. Projector lifts need a set depth above the ceiling, and that depth has to be checked early. Here the family were happy with it partly showing.

Are in-ceiling subwoofers enough for gaming and films?

In this room, two Triad in-ceiling subwoofers provide the bass for films and gaming, and they keep the floor clear. They were chosen because the family did not want subwoofers in the corners or on the floor of a room that also works as a lounge.

Inspired?

Let's Create Your Space

Every extraordinary space starts with a conversation.

Get in Touch